How to Add Weight to a Golf Club With Tape

by Larry Parr

    When most golfers talk about adding weight to a golf club, what they are really talking about is the swing weight of the club: adding weight to the head of the club in order to increase the speed of the swing and thereby increase the distance that the ball is hit. There are different ways of doing this. It is possible to change the club's shaft for one that is weighted slightly more toward the club's head. It's possible to buy a larger club head or to buy a head with a different type of internal fill material that increases weight. However, for the vast majority of golfers who want to increase the swing weight of their clubs, a special lead tape, which can be purchased at any pro shop and even many hardware stores, is the answer.

    Items you will need

    • Lead tape
    • Scissors
    • X-Acto knife

    Step 1

    Cut a 3-inch piece from a thin strip of lead tape. The tape will have a strip of paper on one side; removing the paper will expose a sticky side of the tape which will stick to your club's head.

    Step 2

    Decide what it is you want the extra weight to accomplish: Do you want to hit higher or do you want to reduce a draw or perhaps enhance a draw? What you want to accomplish determines where on the club head you add the weight.

    Step 3

    Adhere the tape to the base of the back of the club to hit the ball higher. Center the tape as much as possible between the toe and heel of the club. Test the club. More weight can be added if desired by adding a 1-, 2- or 3-inch strip of lead tape.

    Step 4

    Add weight to the heel area of the club to enhance a draw or to reduce fading. Again, test your club after adding weight to determine if enough weight has been added or if too much has been added. If you wish to remove the lead tape, use the point of your X-Acto knife to lift a corner of the tape and then peel it off. Rubbing alcohol can help remove any tape residue on your club.

    Step 5

    Add weight toward the toe of the club to reduce draw spin. Once again, test your club to determine if the tape has been added to the proper spot and if too much or too little weight has been added. Adjust as necessary.


    • Changing your club head weight can be somewhat tricky. Experiment with your club after adding weight and alter how far toward the heel or the toe you need to adjust the weight.
    • Adjust the positioning of the weight by either adding tape at the proper spot or by removing the old tape and putting a new piece in a slightly different location.


    • Never add more than 4 inches of thin lead tape at a time. It is often easier to add smaller pieces than it is to remove a large piece and start over.

    About the Author

    Larry Parr has been a full-time professional freelance writer for more than 30 years. For 25 years he wrote cartoons for television, everything from "Smurfs" to "Spider-Man." Today Parr train dogs and write articles on a variety of topics for websites worldwide.

    Photo Credits

    • Comstock/Comstock/Getty Images

    Copyright 2017 Golfsmith International, Inc. All rights reserved.