A golf club’s loft – the angle of the clubface relative to the shaft – helps determine how high you’ll hit the ball. All else being equal, you’ll hit the ball higher with a higher-lofted club, although the more loft a club has, the more distance that is sacrificed. Lofts of specific clubs are fairly standardized but can vary among different manufacturers. Additionally, standard lofts have changed a bit over time. If you want to check the loft of your clubs, or perhaps you wish to buy a used club and the owner doesn’t know its loft, you can check it yourself with the proper tool.
Golf clubs consist of three key components, each of which may be tailored to an individual golfer's needs. Golf clubs made for professional golfers vs. those made for players with high handicaps will have different clubhead shapes, shaft flex and, potentially, grips. The components of a club work in harmony to give golfers the best possible tool for each situation–whether trying to hit a long, powerful drive or a soft, high chip.
Getting fitted for golf clubs is a process that every avid golfer should experience. You'll learn about your swing speed and tendencies and understand what your clubs can do for you. Getting fitted is a fairly easy process and can be done at many golf or pro shops. You'll need to go to your fitting with an open mind, as you might be surprised to learn that your swing is more suited to softer shafts or that you may need more weight on your clubs.
Ever since a 2003 "Golf Digest" study said that most golfers needed more loft on their drivers, the quest for the "correct" loft has heated up. More loft means numerically higher--a 12-degree driver has more loft than a 9-degree. But although we can say for sure that most golfers need more loft than they now use, the exact amount depends on several different aspects of their swings.
More Club Fitting & Custom Clubs Picks
Too many golfers want to get fitted for new clubs because that's what the salesman or club pro told them to do, or because of some sense that nobody buys "off the rack" anymore. For some, fitted clubs will be money well spent, but others would be better off investing in some lessons first.
There's a lot of homework a golfer should do before buying a set of clubs, and one of those is learning the options as to which shafts the clubs should have. If chosen correctly, shafts can help you get the most out of your swing, regardless of your abilities.
Golf club shafts are available in five flexes and may be made of steel or graphite. Clubhead speed determines the flex a golfer needs. The higher the speed, the stiffer the shaft. Steel shafts, which are heavier than graphite, are stiff and less forgiving than graphite. According to Golf.com, graphite shafts are lighter and can help increase swing speed. Selecting the right flex for your shaft is key to good ball striking.
Choosing the proper golf shaft for your swing is essential to reaching your potential on the golf course. The major golf club manufacturers offer a variety of shaft options for use with their clubs. Some shafts carry an additional charge. Before you decide which shaft you need, understand how to read shaft specifications and how they relate to the golf swing.
Although a shorter golf club shaft tends to be firmer than a longer one, it is important to understand the changes trimming a shaft will make to a club before making such a permanent change. Tour pros often have their shafts "tipped," or cut back from the clubhead end slightly to make the tip of the shaft stiffer. This enables them to keep the same length club but have a slightly stiffer shaft near the ball. Cutting a club from the butt end will have somewhat the opposite effect, making the shaft stiffer overall but shorter as well. The most fundamental difference in a shorter club is shorter shot distance, and you might find the change in stiffness is not worth the change to your club.
Technology has changed the game of golf in many ways, ranging from golf club design to training aids and from golf course management to golf apparel. Golf simulators are one of the most technologically advanced game improvement aids. Golf simulators have a mechanism to measure items such as clubhead speed, ball speed, ball spin rate and launch angle by way of varying methods in each simulator. Golf simulators are used primarily in golf stores and fitting clinics but also are installed in residential environments.
It is important for you to use golf equipment that is suited specifically for you. Your clubs should complement your size, physique, golfing ability, gender and style of swing. Many golfers head to a golf retail store or pro shop and buy clubs right off the shelf, missing out on the benefits of clubs that are geared to their body and skill level. You would not buy a suit of clothes right off the rack if you were 6-foot-6 with extra-long arms and torso. The same principle holds true for golf-club selection. With a few simple pointers, you can arm yourself with a great set of golf clubs tailored specifically for you. The correct-size golf clubs can enhance your golf swing and your game.
If you have purchased a set of used golf clubs that are too long, you can quickly cut them down to size with a hand-held rotary tool. You can also resize your old clubs and pass them on to your children. The shaft of a golf club is narrower at the head end to generate power on the swing. When shortening a golf club, you must remove the grip and cut the wide end of the shaft so the club can still flex properly.
If you are going to shorten a golf club, there are a few things to keep in mind. The more shaft you cut off, the lighter, more stiff, and effectively flatter the club becomes. For every 1/2 inch you remove, you will lose approximately three swingweight points. You can readjust the swingweight by adding lead tape to the head of the club. Any amount of cutting will slightly stiffen the club. It will probably go unnoticed if you take 1 inch or less off the club. Taking 2 inches off will change the flex of the club. If you are shortening irons, every 1 inch you shorten the club will make the iron effectively play 2 degrees flatter. You may need to have the lie angles readjusted after shortening them.
The shaft is a critical component of the golf club. The shaft is used to transfer the energy of your swing to the golf ball. You should not pick a shaft solely based on the popularity of a brand name or on what type of shaft your old clubs had. By taking the time to pick a shaft to match your golf swing, you can ensure your clubs will help improve your overall game.
Once a golf club shaft has been broken, it cannot be repaired, but it can easily be replaced. Shafts can be replaced at golf pro shops and most golf stores, but it is also a fairly easy project to do yourself. Replacing your own shaft can save time and money, and allow you to try a new shaft without purchasing new clubs.
Finding golf clubs that suit your game used to be simple. You walked into a sporting goods store, asked for your favorite brand of clubs, took a look at them and determined if you could afford them. If you could, you took a box of irons and a box of woods out of the store with you. Today, the process is not so simple, but the results are clubs that are fit for your swing.
Golf shafts come in different shaft flexes, weights, lengths and materials so the club maker can build a club that fits each golfer's swing. Steel shafts come in two tip types, taper and parallel. The tip is the part of the shaft that fits into the hosel of the clubhead. The difference between the two types of shaft is the tip diameter and shaft weight.
First, it was outlandish pants that set golfers apart from each other. Next, it was head covers that showed a lot of creativity; then the professional women turned to painted balls to make a fashion statement. Now it has become the rage to have club shafts painted in different colors. In fact, some of the manufacturers make clubs with shafts of different colors. If you have a set of clubs that you would like to paint, there are a few steps you should follow.
Each component of the golf club has unique characteristics. Rarely will a club "off the rack" have the exact grip, shaft and club head that is best for your game. In order to choose the best golf club for you or to custom build a set of golf clubs, you need to know about the parts of the club.
Most people who need new golf clubs spend hundreds if not thousands of dollars on clubs that don't fit them. They shy away from making their own because they believe it's too much of a challenge. The fact is, you can make clubs that fit you perfectly and cost far less than you will pay for clubs off the rack. By following some simple steps and making your own clubs, you'll soon be shooting lower scores than you ever imagined.
You can invest $1,000 or more for a good set of golf clubs, or you can spend a fraction of that amount by making the clubs yourself. It may sound like a daunting task, but actually it's quite easy if you follow some simple instructions. Not only will you have a great feeling of accomplishment, you will have made clubs that are tailor-made for you.
Understanding golf club loft can improve performance on the course. This is most important with a driver. Driver loft determines ball trajectory. While some drivers will work for most people, variables such as swing speed and swing arc can make a difference. Understanding those variables can help ensure selection of the proper driver and help golfers obtain the correct mix of trajectory and power.
Instead of putting another shaft on a golf club, most golfers decide to buy another club. But it is easy and less expensive to replace the shaft.
Torque is the measure of how much the shaft twists during the golf swing. It may be hard to imagine this even happening, but shafts are made with that particular fact in mind. They are even made to resist it more or less, depending on your swing and what kind of results you are looking for. It is measured by degrees; 1 for very little and 8 or more for a lot of twisting.
Whether you're a beginner just getting in to the sport or a skilled golfer looking to step up your game, having properly fitted clubs will help you cut strokes and bring your handicap down to a respectable size. A good pro shop or golf-specialty store can help you with a club fitting, but there are a few basics you can mull over when you're hunting for that perfect fit.
What's a golfer to do since he has so many choices? First, he must decide whether he wants graphite shafts, steel shafts or a combination. Then he must choose the right flex of the shafts. Flex is the amount that the shaft will bend when it is swung. All of us have heard the admonition, “let the club do most of the work”. If you choose the right shaft, that can be true. With the right shaft, you'll swing the club easier and get more distance out of your shots.
The loft of any golf club, including a driver, is what determines how high a shot will go when the club head strikes the ball, according to GolfEngineering.net. Loft is the degree of the angle formed between a straight line from the ground and the club head, when the club head is sitting squarely on the ground. Drivers have the lowest loft of all clubs, except putters. Loft in drivers ranges from 7 to 20 degrees, though most off-the-rack men's drivers have lofts between 8 and 11 degrees.
All too often, golfers pay little attention to the shafts of the clubs they buy. Just like the clubs, the shafts need to be matched to a golfer's abilities and physical characteristics so they will help, not hurt, the golfer reach his potential. There are certain things that you should look for before investing in a set of golf clubs. Choose the right shafts and you will make a positive contribution to your game.
Golfers are not all the same in stature and golfing ability, and the clubs they use should reflect these differences. You can make sure that the clubs you use are suited to your game by getting measured properly and selecting clubs to fit the measurements. Golf retailers may have a launch monitor that measures swing speed along with other characteristics of your swing. The best idea is to visit a golf professional to get fitted for clubs.
Everything in life has many different things, pieces or components which make up the individual article or the total item. This is definitely the case when it comes to the makeup of the golf club. This most essential piece of golfing equipment is constructed of five different components that all come together to create what is needed on the course.
Some women golfers are playing with clubs that don't fit them without realizing it. Too often, women buy golf clubs without having a professional fit them with the right clubs. For example, women stand a 1 in 5 chance of having clubs of the wrong length. There are others whose clubs do not have the right shafts or whose club heads are not angled properly for their height. Read on for ways to lower your scores by playing with the right golf clubs.
One important aspect in learning to play golf, and hitting successful and consistent golf shots, is to properly fit golf clubs to your size. Every golfer’s body and golf swing is unique; therefore, club fitting is as important as taking golf lessons or buying the correct size of golf shoes. Basic club fitting is neither a lengthy process nor an expensive one, but can improve your game.
Most golf clubs sold at sporting stores are the same size. The set standard is geared for a player who stands at approximately 5 feet 9 inches. While these clubs can be used by shorter or taller players, maximum consistency and performance can be gained from clubs that are fitted to the individual. You can fit your golf clubs using simple size and club length formulas.
Golfers looking for new clubs can have a golf club fitting to learn what characteristics to look for in a club. Whether you are buying ready-made clubs or are considering having custom clubs made, you need to have some measurements ready to be sure that the clubs you buy are appropriate. There are several club fitting methods, including computer-generated analysis, but they all use the same kind of information to determine the right club for you. Clubs that are fitted to your specifications should provide you with more distance and accuracy.
People spend more than a $1,000 for a new set of golf clubs, so you'd be smart to save a large portion of that expense and repair the clubs you have. You will have a set of clubs that have been tailor-made for you and your game, and you will save hundreds of dollars in the process.
Golf club shafts come in five flexes and both graphite and steel shafts use the same system for determining flex. Because golf shafts bend during a swing based on how fast your club speed is, the faster your swing, the stiffer the flex you need. Since you need to make sure the club face is square with the ball at impact, finding the right flex is critical to consistently hitting the ball well. Regular and firm flexes -- also known as stiff flexes -- are the most popular among men.
Golf club shafts come in a variety of thicknesses to accommodate players of different sizes, strength and ability level. The hole in the base of the club head, or hosel, must be the same size as the shaft or it will not fit properly. A shaft that is too small for the club head can be dangerous because there are gaps between the inside of the hosel and the surface of the shaft that prevent the glue from creating a solid seal. The club head may wobble at the point of impact or even slide off the end of the shaft during the golfer's swing.
Determining the tip thickness of a golf club shaft is important when installing a new shaft in a clubhead. Knowing the tip thickness will determine whether or not the shaft will fit appropriately into the hosel of the clubhead. If the shaft tip is too thin, then the epoxy will not form a solid bond, and the clubhead will fall off; if the tip is too thick, it will not fit into the hosel of the clubhead.
One of the most misunderstood aspects of picking out a driver is choosing the loft. Too often, an amateur golfer will choose the loft of his or her new driver based on what their favorite professional player uses instead of taking the time to assess the best loft to suit his skills. An appropriate loft choice will maximize your distance. The majority of drivers on the market today range between a 4-degree and 20-degree loft.
Golfers so often hear about the term "loft," particularly as it pertains to driving the ball off the tee. But how exactly is the term "loft" defined? Fortunately, there is a specific definition of the term, as well as ways to go about ensuring optimal loft during that next round on the links.
No two golfers are the same, and it follows that using a golf club that fits your physical characteristics and playing abilities may improve your distance, accuracy and consistency on the golf course. High handicappers stand to gain the most benefit from custom clubs, because they have so much room for improvement. Custom right- and left-handed clubs are available for men, women and juniors.
There are three elements to consider when you are about to change the shafts in your golf clubs. They are the length, the amount of flex (stiffness of the shafts) and the materials that comprise them. Furthermore, you should choose shafts that are based on your physical stature and the status of your game. If you choose the right shafts, you will soon see your game improve and your love of the game strengthen.
Since the 1990s, improvements in golf club technology have helped increase the average distance of drives and other shots by up to 30 yards. One of the reasons for the increased range has been the improvement in golf club shaft technology over the same time period. The golf club shaft is used to transfer the energy of your swing to the club head at impact with the golf ball. One of the factors that you will need to consider when searching for new golf shafts is the golf shaft thickness.
There are five different stiffnesses of golf shafts. Stiffness of a shaft indicates how much it will bend during a shot; different types of golfers require shafts with different stiffnesses. If you swing the club with little speed and your ball travels a short distance, you probably need a shaft that will bend a lot when you hit the ball. Conversely, if your clubhead speed is accelerated and you hit the ball a long way, you probably need a stiffer shaft. Interestingly, many touring professional golfers do not use the stiffest shafts in their drivers because they allow the club to do more of the work. Read on for more information about the right shafts for you and your game.
Selecting the correct shaft is just as important as selecting the right model of golf club. Key things to take into account when looking at a shaft are the length, flex, kick-point, material, and weight. Choose the club that feels best and performs well, even if its not the most popular or expensive model.
If you're looking for ways to correct the loft of your drive, it's worth examining the flex rating of your driver. If you're using a driver that is too flexible or too stiff for the speed of your swing, your loft may be way off in either direction. Proper loft can be achieved with drivers of any flex rating--the key is finding the best flex rating for your unique swing.
People often like to change the shaft in their golf club, whether it's because the current one broke or because they want to try out the newest one on the market without purchasing a new club. To help save money, this is a task anyone can do with the right tools.
Instead of paying the pro shop the next time you need to change a golf club shaft, save money by doing it yourself at home. Make sure your replacement shaft is the same size as the original or it might not fit inside the club head's hosel. The hosel is the junction point between the head and the tip of the shaft. Check the size with a shaft identification gauge if you cannot find it on the label.
As a golfer, you know that buying new golf clubs can be expensive, but you may have never thought of building your own. By putting together your own set, not only can you save money, but you can build a set of clubs custom made to your size and preferences.
Steel golf shafts are traditionally heavier than graphite shafts and the key benefit, according to the U.S. Golf Teachers Federation, is accuracy. Because of the weight, steel shafts are traditionally shorter than graphite shafts, making them easier to control. According to "Golfweek," steel shafts weigh up to 125 g and extra-heavy shafts weigh up to 139 g. Graphite shafts typically weigh up to 90 g.
According to Golf.com, graphite shafts for golf clubs have been in production since the 1970s and offer a lightweight alternative to steel shafts, which debuted in the 1930s. Generally recommended for those with slower swing speeds (75 mph or less), 84 percent of woods and 28 percent of irons had graphite shafts as of 2006, according to Golf.com. Graphite shafts are traditionally more expensive than steel.
Assembling a golf club is a great project for the do-it-yourself type. You can purchase clubheads, shafts and grips individually to assemble clubs that fit your unique needs. The process is fairly straightforward, though it does require some patience, and you will improve your technique over time.
When most golfers talk about adding weight to a golf club, what they are really talking about is the swing weight of the club: adding weight to the head of the club in order to increase the speed of the swing and thereby increase the distance that the ball is hit. There are different ways of doing this. It is possible to change the club's shaft for one that is weighted slightly more toward the club's head. It's possible to buy a larger club head or to buy a head with a different type of internal fill material that increases weight. However, for the vast majority of golfers who want to increase the swing weight of their clubs, a special lead tape, which can be purchased at any pro shop and even many hardware stores, is the answer.